This plugin is currently marked as disabled
This plugin can cause severe server issues in its current form.
Display room temperature on navbar
Plugin that displays room temperature on navbar
Based on OctoPrint-NavbarTemp by imrahil (https://github.com/imrahil/OctoPrint-NavbarTemp)
This plugin displays room temperature on navbar via a ds18b20 sensor connected to pin n°4 of your raspberry Pi
Setup:
1 - Connect your ds18b20 sensor to your Pi (see Howto below)
2 - Install the roomTemp plugin using Plugin Manager
Howto: Connecting your ds18b20 sensor
1 - Connecting your ds18b20 sensor to the Pi:
2 - Then connect to your Octopi via ssh.
3 - we first need to open up the boot config file, this can be done by running the following command:
sudo nano /boot/config.txt
4 - At the bottom of this file enter the following.
dtoverlay=w1-gpio
5 - Once done save & exit by pressing ctrl x and then y.
6 - Now reboot the Pi by running the following command.
sudo reboot
7 - Enjoy !!