Plugin RepoPlugin notices
Since version 1.3.3 OctoPrint supports centralized plugin notices that can be displayed to users that have specific plugins/plugin versions installed. This is used by the official plugin repository to notify about issues or changes in the plugins that require action of the user.
Displaying the notices is implemented by the bundled Plugin Manager inside OctoPrint.
The notices are hosted here on plugins.octoprint.org as a JSON file
and currently contain the following entries:
| Plugin | Affected Plugin Versions | Affected OctoPrint Versions |
|---|---|---|
|
Autoselect
Version 0.2.0 of this plugin is available, but your version 0.1.0 does not yet support updating automatically. Please re-install the plugin from the repository to update. More details can be found at the “Read more…” link below. |
0.1.0 | all |
|
DisplayLayerProgress
Some users are experiencing layer shifts that seem to be caused by this plugin. If this affects you, please disable it for now and follow the discussion found at the “Read more…” link below. |
1.17.0, 1.18.0, 1.19.0, 1.19.1, 1.20.0 | all |
|
Detailed Progress
Version 0.2.3 of this plugin is available from a new maintainer, but your version still looks for updates at the repository of the old maintainer. Please re-install the plugin from the repository to update. The release notes of the version by the new maintainer can be found at the “Read more…” link below. |
0.1.0, 0.1.1, 0.1.2, 0.1.3, 0.1.4 | all |
octoprint_eta
This plugin seems to have been abandoned by its original author, but a new maintainer has stepped up to maintain a fork which you might want to manually install. If so, please uninstall “OctoPrint-Display-ETA” and then install “OctoPrint-Display-ETA” from the repository. |
all | all |
|
CommandSplitter
Version 0.2.2 of this plugin is available, but your version does not yet support updating automatically. Please re-install the plugin from the repository to update. More details can be found at the “Read more…” link below. |
0.1.0, 0.2.0, 0.2.1 | all |
|
FilamentManager
Version 1.6.0 of this plugin is available from a new maintainer, but your version still looks for updates at the repository of the old maintainer. Please re-install the plugin from the repository to update, keeping your settings. The release notes of the version by the new maintainer can be found at the “Read more…” link below. |
0.1.0, 0.1.1, 0.2.0, 0.2.1, 0.2.2, 0.3.0, 0.4.0, 0.4.1, 0.5.0, 0.5.1, 0.5.2, 0.5.3 | all |
|
OctoKlipper
Version 0.3.1 of this plugin is available from a new maintainer, but your version still looks for updates at the repository of the old maintainer. Please re-install the plugin from the repository to update, keeping your settings. The release notes of the version by the new maintainer can be found at the “Read more…” link below. |
0.1.5, 0.2.0, 0.2.1, 0.2.2, 0.2.3, 0.2.4, 0.2.5 | all |
|
CostEstimation
Version 3.0.0 of this plugin is available from a new maintainer, but your version still looks for updates at the repository of the old maintainer. Please re-install the plugin from the repository to update, keeping your settings. The release notes of the version by the new maintainer can be found at the “Read more…” link below. |
0.3.0, 0.4.0, 1.0.0, 1.1.0, 2.0.0, 2.0.1, 2.1.0, 2.1.1, 2.1.2, 2.1.3 | all |
|
Creality 2x temperature reporting fix
Version 0.0.4 of this plugin is available, but due to a name change the automatic update needs a bit of extra help. Please uninstall the plugin and then just reinstall it from the plugin repository. |
0.0.1, 0.0.2, 0.0.3 | all |
filamentreload
Version 1.3.0 of this plugin is available from a new maintainer, but your version still looks for updates at the repository of the old maintainer. Please re-install the plugin from the repository to update, keeping your settings. The release notes of the version by the new maintainer can be found at the “Read more…” link below. |
1.0.0, 1.1.0, 1.1.1, 1.2.0 | all |
|
Marlin EEPROM Editor
Version 2.0.0 of this plugin is available from a new maintainer, but your version still looks for updates at the repository of the old maintainer. Please uninstall the old plugin from the plugin manager, then reinstall from the plugin repository to update it. The release notes of the version by the new maintainer can be found at the “Read more…” link below. |
0.1.0, 1.0.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4, 1.2, 1.2.1, 1.2.2 | all |
|
Printer Statistics
Version 3.0.0 of this plugin is available from a new maintainer, but your version still looks for updates at the repository of the old maintainer. Please uninstall the old plugin from the plugin manager, then reinstall from the plugin repository to update it. The release notes of the version by the new maintainer can be found at the “Read more…” link below. |
1.0.0, 2.0.0, 2.0.2 | all |
|
Continuous Print
Version 1.0.4 of this plugin is available from a new maintainer, but your version still looks for updates at the repository of the old maintainer. Please uninstall the old plugin from the plugin manager, then reinstall from the plugin repository to update it. The release notes of the version by the new maintainer can be found at the “Read more…” link below. |
1.0.0, 1.0.1, 1.0.2, 1.0.3 | all |
|
OctoPrint-GcodeLeveling
There are reports of this plugin somehow breaking extrusion on OctoPrint 1.5.0. It has since been blacklisted until the author can look into this. If it is still active on your instance, please disable it and restart to avoid this problem. |
0.1.0, 0.1.1 | >=1.5.0 |
|
M73 ETA Override
Version 1.0.4 of this plugin is available from a new maintainer, but your version still looks for updates at the repository of the old maintainer. Please uninstall the old plugin from the plugin manager, then reinstall from the plugin repository to update it. The release notes of the version by the new maintainer can be found at the “Read more…” link below. |
1.0.0, 1.0.1 | all |
|
WebcamTab
Version 0.2.0 of this plugin is available from a new maintainer, but your version still looks for updates at the repository of the old maintainer. Please uninstall the old plugin from the plugin manager, then reinstall from the plugin repository to update it. The release notes of the version by the new maintainer can be found at the “Read more…” link below. |
0.1.0, 0.1.1, 0.1.2 | all |
|
OctoPrint-Mmu2filamentselect
Version 1.0.3 of this plugin is available from a new maintainer, but your version still looks for updates at the repository of the old maintainer. Please uninstall the old plugin from the plugin manager, then reinstall from the plugin repository to update it. The release notes of the version by the new maintainer can be found at the “Read more…” link below. |
1.0.0, 1.0.1, 1.0.2 | all |
|
Slack
Version 0.2.4 of this plugin is available from a new maintainer, but your version still looks for updates at the repository of the old maintainer. Please uninstall the old plugin from the plugin manager, then reinstall from the plugin repository to update it. The release notes of the version by the new maintainer can be found at the “Read more…” link below. |
0.1, 0.2, 0.2.1, 0.2.2, 0.2.3 | all |
|
Access Anywhere - The Spaghetti Detective
On August 19th 2021 a vulnerability was discovered with The Spaghetti Detective that allowed unauthorized access to OctoPrint instances. The issue was resolved shortly after being discovered, more information is available at the “Read more…” link below. |
0.2.0, 0.2.1, 0.3.0, 0.5.0, 0.5.1, 0.5.2, 0.5.3, 0.5.4, 0.6.0, 0.6.1, 0.7.0, 0.7.1, 0.8.0, 0.8.1, 0.8.2, 0.8.3, 0.9.0, 0.9.1, 0.9.2, 0.9.3, 1.0.1, 1.0.2, 1.0.3, 1.0.4, 1.0.5, 1.0.6, 1.0.7, 1.0.8, 1.1.0, 1.1.1, 1.1.2, 1.1.3, 1.1.4, 1.1.5, 1.1.6, 1.2.0, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5, 1.3.0, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.5, 1.4.0, 1.4.1, 1.4.2, 1.4.3, 1.4.4, 1.4.5, 1.4.6, 1.4.7, 1.5.0, 1.5.1, 1.5.2, 1.5.3, 1.6.0, 1.6.1, 1.6.2, 1.6.3, 1.6.4, 1.6.5, 1.6.6, 1.6.7, 1.7.0, 1.7.1, 1.7.2 | all |
|
MetadataPreprocessor
Version 0.2.1 of this plugin is available from a new maintainer, but your version still looks for updates at the repository of the old maintainer. Please uninstall the old plugin from the plugin manager, then reinstall from the plugin repository to update it. The release notes of the version by the new maintainer can be found at the “Read more…” link below. |
0.1.0, 0.2.0 | all |
|
OctoPrint-Enclosure
The maintainer of this plugin is looking for some help with maintaining it from the community. If this sounds like something you’d like to lend a hand in, please click on the “Read more…” link below. |
all | all |
|
HeaterTimeout
Version 0.0.4 of this plugin is available from a new maintainer, but your version still looks for updates at the repository of the old maintainer. Please uninstall the old plugin from the plugin manager, then reinstall from the plugin repository to update it. The release notes of the version by the new maintainer can be found at the “Read more…” link below. |
0.0.1, 0.0.2, 0.0.3 | all |
|
AutomaticShutdown
This plugin has been abandoned by its maintainer and is looking for someone to adopt it. If you want to step in as the new maintainer please get in touch at the “Read more…” link below. |
all | all |
filamentreload
This plugin has been abandoned by its maintainer and is looking for someone to adopt it. If you want to step in as the new maintainer please get in touch at the “Read more…” link below. |
all | all |
|
Active Filters
This plugin has been abandoned by its maintainer and is looking for someone to adopt it. If you want to step in as the new maintainer please get in touch at the “Read more…” link below. |
all | all |
|
Cost estimator
This plugin has been abandoned by its maintainer and is looking for someone to adopt it. If you want to step in as the new maintainer please get in touch at the “Read more…” link below. |
all | all |
|
Octoprint-Smart-Filament-Sensor
This plugin has been abandoned by its maintainer and is looking for someone to adopt it. If you want to step in as the new maintainer please get in touch at the “Read more…” link below. |
all | all |
|
GcodeSuperLaserController
This plugin has been abandoned by its maintainer and is looking for someone to adopt it. If you want to step in as the new maintainer please get in touch at the “Read more…” link below. |
all | all |
TemperatureFailsafe
This plugin has been abandoned by its maintainer and is looking for someone to adopt it. If you want to step in as the new maintainer please get in touch at the “Read more…” link below. |
all | all |
|
Autocalibration
This plugin has been abandoned by its maintainer and is looking for someone to adopt it. If you want to step in as the new maintainer please get in touch at the “Read more…” link below. |
all | all |
LEDStripControl
This plugin has been abandoned by its maintainer and is looking for someone to adopt it. If you want to step in as the new maintainer please get in touch at the “Read more…” link below. |
all | all |
|
Filetypes
This plugin has been abandoned by its maintainer and is looking for someone to adopt it. If you want to step in as the new maintainer please get in touch at the “Read more…” link below. |
all | all |
|
Growl
This plugin has been abandoned by its maintainer and is looking for someone to adopt it. If you want to step in as the new maintainer please get in touch at the “Read more…” link below. |
all | all |
|
OctoPrint-WebcamStreamer
This plugin has been abandoned by its maintainer and is looking for someone to adopt it. If you want to step in as the new maintainer please get in touch at the “Read more…” link below. |
all | all |